SNMP config in 3750 Catalyst

mirtenmous · ‎02-13-2008

Hi.

I woulk like to enable SNMP in a Cisco 3750 Catalyst switch.

I am doing it with Cisco network assistant 5.

I configured a community string, after I enabled trap manager but here I don't know if I must to write IP address of the switch or ip address of the machine what I will get SNMP traps.

I have another question, what will I need to get snmp traps in a pc?.

Thanks.

Collin Clark · ‎02-13-2008

The IP address should be the address of the SNMP Manager (the PC). Generally speaking most SYSLOG servers can read SNMP traps. Take a look at Kiwi SYSLOG, I know it can.

www.kiwisyslog.com

HTH