CallManager and SRST deployement

Unanswered Question
Feb 14th, 2008
User Badges:

Hi all, i have a question regarding centralized deployment in CCM using SRST as a backup for remote site

So, when the callmanager become unvailable the ip phones of remote branch will register with the SRST but how these phones will get their Directory Number or SRST will assign a default DN for these phones?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (3 ratings)
Loading.
Rajesh Revuru Thu, 02/14/2008 - 06:43
User Badges:
  • Silver, 250 points or more

Phones will retain there Directory Numbes from CCM during the SRST.


You do not have to define any ephone-dn's


thomasarun Thu, 02/14/2008 - 06:47
User Badges:

Once u configured SRST, GW will download all information from CCM.U dont need to configure Dn's but u must configure dial-peer for outbound calls

Seifeddine-Tlili Thu, 02/14/2008 - 06:52
User Badges:

thanks for your reply, regarding dial-peer i think that this is done when setting up the SRST via the cmd "access code FXO 9" correct me if i'm wrong :)!!

MARTIN WEDDLE Thu, 02/14/2008 - 11:46
User Badges:

You need to configured individual dial-peers for each type of outbound call you wish to allow in SRST mode. There is no class of service in SRST mode. Also, if your running MGCP and have analog FXO ports, make sure the MGCPapp dial-peers are the first analog dial-peers for each FXO port in the voice gateway config.

Actions

This Discussion