brand new 2851 problem

Answered Question
Feb 14th, 2008
User Badges:
  • Purple, 4500 points or more

Got a brand new 2851 and it appears it has a problem when I try to do a write mem I get the following . any way around this or is time to RMA .


*Feb 14 15:13:37.543: %SYS-5-CONFIG_I: Configured from console by console

*Feb 14 15:13:39.463: NV: Invalid Pointer value(45911384) in private configuration structure

*Feb 14 15:13:39.503: NV: Invalid Pointer value(45911384) in private configuration structure

*Feb 14 15:13:39.503: %SYS-4-NV_BLOCK_INITFAIL: Unable to initialize the geometry of nvram



Correct Answer by davetucker about 9 years 3 months ago

Hi Glen,


Had the same problem with a 3845 the other week.


Try the following


erase /all nvram:


This will erase the NVRAM, Re-Initialise the geometry and reset the pointer unlike the "erase nvram" command.


Hope this helps, if so please rate.


Regards,


Dave

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
davetucker Thu, 02/14/2008 - 07:38
User Badges:
  • Bronze, 100 points or more

Hi Glen,


Had the same problem with a 3845 the other week.


Try the following


erase /all nvram:


This will erase the NVRAM, Re-Initialise the geometry and reset the pointer unlike the "erase nvram" command.


Hope this helps, if so please rate.


Regards,


Dave

glen.grant Thu, 02/14/2008 - 07:42
User Badges:
  • Purple, 4500 points or more

Dave you are the man , that fixed it . Thats what is great about this forum . Saved me the hassle of RMAing the device . Got to keep that one in the back of mind .

Actions

This Discussion