Disable debugging in config

Unanswered Question
Feb 14th, 2008
User Badges:

Since upgrading firmware, on each boot the router automatically turns on debugging, and it has to be manually switched off using the "undebug all" command. How do I stop this from occuring?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Edison Ortiz Thu, 02/14/2008 - 11:28
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

That's odd. Post show version and show debug from that router prior disabling the behavior.


__


Edison.

damianmoran Thu, 02/14/2008 - 15:01
User Badges:

Thanks for the reply.


show version:


Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T3,

RELEASE SOFTWARE (fc1)


show debug:


dot11:

dot11 Syslog debugging is on

Edison Ortiz Thu, 02/14/2008 - 15:33
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

CSCsi60925 Bug Details

dot11 syslog debug enabled by default


Symptom:

'show debug' shows that syslog debug messages are enabled by default.


Conditions:

On router boot up, dot11 syslog debug enabled.


Workaround:

None.



_____________


Status

Fixed


Severity

4


Last Modified

In Last 7 Days


Product

Cisco IOS software


Technology



1st Found-In

12.4(13.9)PI6a

12.4(13.13)T1

Known Affected Versions



Fixed-In

12.4(18.2)T


http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=%20CSCsi60925


HTH,


__


Edison.

Actions

This Discussion