Inserts in GEIP+.

Unanswered Question
Feb 14th, 2008
User Badges:

Dear experts


I have one problem on Cisco 7513 router.


I need to insert GEIP+ on the Cisco 7513


so I insert GEIP+ to slot3 but is not work.


Below log is the "show diag " output.


Slot 3:

Physical slot 3, ~physical slot 0xC, logical slot 3, CBus 0

Microcode Status 0x4

Master Enable, LED, WCS Loaded

Board is analyzed

Pending I/O Status: None

EEPROM format version 1

VIP4-80 RM7000 controller, HW rev 2.04, board revision A0

Serial number: 35413536 Part number: 73-8676-02

Test history: 0x00 RMA number: 00-00-00

Flags: cisco 7000 board; 7500 compatible


EEPROM contents (hex):

0x20: 01 22 02 04 02 1C 5E 20 49 21 E4 02 00 00 00 00

0x30: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


Slot database information:

Flags: 0x4 Insertion time: 0xF4B18684C (00:04:38 ago)

VIP Controller Memory Size: Unknown


--Boot log begin--


Cisco Internetwork Operating System Software

IOS (tm) VIP Software (SVIP-DW-M), Version 12.2(6), RELEASE SOFTWARE (fc2)

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Wed 07-Nov-01 16:00 by pwade

Image text-base: 0x600109A8, data-base: 0x603E0000



--Boot log end--


Please let me know the reason.


Thanks


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
dongdongliu Thu, 02/14/2008 - 18:25
User Badges:

The GEIP+ is based on the VIP4-80.

when you show diag, output display that Controller Memory Size is *Unkown*. i`m not sure, but I think it is because of IOS version high, maybe 12.1X is suitably for GEIP+. Cisco suggestion is higher than 12.1(3)E.

but, if you have a GBIC, insert it into GEIP+(ignore system error), to our surprise, GBIC will work well on 12.2(6).


please look at this:

http://www.cisco.com/en/US/products/hw/modules/ps2643/products_tech_note09186a0080094b15.shtml

Leeyoungsoo Thu, 02/14/2008 - 18:59
User Badges:

Thanks for your reply.


this router has following ios version


OS (tm) RSP Software (RSP-JSV-M), Version 12.2(6), RELEASE SOFTWARE (fc2)

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Thu 08-Nov-01 02:22 by pwade

Image text-base: 0x600109C8, data-base: 0x619D2000


ROM: System Bootstrap, Version 11.1(8)CA1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

BOOTLDR: GS Software (RSP-BOOT-M), Version 11.1(8)CA1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)


ceima1 uptime is 2 years, 4 weeks, 2 days, 5 hours, 44 minutes

System returned to ROM by reload at 15:33:21 gmt Thu Mar 31 2005

System restarted at 15:03:27 gmt Sun Jan 15 2006

System image file is "slot0:rsp-jsv-mz.122-6.bin"


Is that problem?


thanks again

dongdongliu Thu, 02/14/2008 - 19:27
User Badges:

Hi, lee

I`ve met the same problem, then I changed IOS from 122-25 to 122-18, it was solved.

but I`m not sure 122-25 is not compatible with GEIP+. but GBIC is work well with 122-25!

it`s only a suggestion :)


regards

dongdong

Leeyoungsoo Fri, 02/15/2008 - 00:18
User Badges:

Dear dongdong!


As your advise,I changed IOS version from

12.2(6) to 12.1(23)E4 and it was solved.


Thanks for your advise!


Can I ask one more question?


We need to use a ENHANCED ATM DS3 PA and ENHANCED ATM OC3 SMI PA.


So thease port adapters are working in this IOS version?


Thanks again!

dongdongliu Fri, 02/15/2008 - 00:48
User Badges:

dear lee,

please see the below:

...

PA Bay 0 Information:

ENHANCED ATM OC3 SML PA, 1 ports,FRU: PA-A3-OC3-SML

EEPROM format version 1

HW rev 2.00, Board revision A0

Serial number: 2311935 Part number: 73-2528-06


--Boot log begin--


Cisco Internetwork Operating System Software

IOS (tm) VIP Software (SVIP-DW-M), Version 12.2(18)S9, RELEASE SOFTWARE (fc1)

...


we are using ENHANCED ATM OC3 SML PA

it`s working well


SML=Singlemode(LR) Long Reach

SMI=Singlemode(IR) Intermediate Reach

Actions

This Discussion