Removing transport from line vty

sholeh · ‎02-14-2008

Can anyone help me removing transport command from my Cisco Aironet AIR-AP1242AG-A-K9 1242 ?

I want back to the default.

I have reset it but didn't work

Thanks in advanced.

Best regards,

Slh

line con 0

transport preferred all

transport output all

line vty 0 4

transport preferred telnet

transport input telnet

transport output telnet

line vty 5 15

transport preferred none

transport input none

transport output none

!

end

Scott Fella · ‎02-15-2008

I don't think you can. You just have to set it to all, telnet, none or ssh if available. What are you trying to acomplish by removing the transport?

-Scott
*** Please rate helpful posts ***

sholeh · ‎02-15-2008

Hi Fella,

What I want to achieve is if I want to access to this device authentication for telnet and web browser should use user tacacs

This the command I put in the setting:

aaa new-model

aaa authentication login default group tacas local

ip http server

ip http authentication aaa

ip http port 45522

every time I apply this setting to the device which has transport command as in my previous massage. my username and password from tacacs server doesn't work.

Scott Fella · ‎02-19-2008

Take a look at this;

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008069593c.shtml

-Scott
*** Please rate helpful posts ***

sholeh · ‎02-23-2008

Fella,

Thanks a lot for the help and information, I will try immidiately.

As soon as I get back to the office.

Regards,