02-14-2008 09:42 PM - edited 03-18-2019 08:28 PM
Unity 5 on CCM 5.0
System appears to miss dtmf if dialing at quick (normal) speed. Works ok if dial each digit slowly.
Affects internal and external calls.
Is there adjustment for the dtmf timers in Unity?
Thanks,
Scott
02-15-2008 01:15 PM
Hi, is this happening when this is an outside caller? (if it is what kind of GW is this MGCP or H.323), what happens to an internal (local) caller? have you verify on the GW or CCM trace if the DTMFs are being received and sent?
02-16-2008 04:40 PM
I think it's fixed. Could be caused because CCM is temporarily "behind" the legacy PBX so incoming voice levels could be low.
I ran the set volume utility and reduced Unity by 2 db from -26 to -28. Tested ok after.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide