Reg:2800 router isp failover and loadbalance

Answered Question
Feb 15th, 2008
User Badges:

Dear sir,


iam having 2800 router iamhaving 2 leased line (v.35)each capacity is 2mb both leased lines r from same isp .now we want to achive loadbalance and isp failover.

plz give me some examples.


Regards

srini

Correct Answer by paolo bevilacqua about 9 years 3 months ago

That is your configuration example:

http://cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a00808d2b72.shtml


Hope this helps, please rate post if it does!


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (2 ratings)
Loading.
alessandro.veras Fri, 02/15/2008 - 11:47
User Badges:

I believe in this your case the routing is made by static routes.

To achive load-balance the ISP needs to configure your lan address in both links and you need to set a default static route to both links. Its recommended to active CEF in your router.


Ex:


CPE > Link1 - Ip x.x.x.x. ISP > Link1

CPE > Link2 - Ip y.y.y.y. ISP > Link2


In CPE ( Your Router )


ip route 0.0.0.0 0.0.0.0 x.x.x.x

ip route 0.0.0.0 0.0.0.0 y.y.y.y


ip cef


Plz Rate.

Actions

This Discussion