Solved: Reg:2800 router isp failover and loadbalance

dhanikonda · ‎02-15-2008

Dear sir,

iam having 2800 router iamhaving 2 leased line (v.35)each capacity is 2mb both leased lines r from same isp .now we want to achive loadbalance and isp failover.

plz give me some examples.

Regards

srini

paolo bevilacqua · ‎02-15-2008

That is your configuration example:

http://cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a00808d2b72.shtml

Hope this helps, please rate post if it does!

View solution in original post

paolo bevilacqua · ‎02-15-2008

That is your configuration example:

http://cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a00808d2b72.shtml

Hope this helps, please rate post if it does!

Alessandro Veras · ‎02-15-2008

I believe in this your case the routing is made by static routes.

To achive load-balance the ISP needs to configure your lan address in both links and you need to set a default static route to both links. Its recommended to active CEF in your router.

Ex:

CPE > Link1 - Ip x.x.x.x. ISP > Link1

CPE > Link2 - Ip y.y.y.y. ISP > Link2

In CPE ( Your Router )

ip route 0.0.0.0 0.0.0.0 x.x.x.x

ip route 0.0.0.0 0.0.0.0 y.y.y.y

ip cef

Plz Rate.