cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
504
Views
0
Helpful
3
Replies

Configuring a switch for 802.1x

netopia
Level 1
Level 1

I have a 3750G switch and a Cisco ACS unit, and I am trying to configure the switch (or specifically one port on one vlan) to be an authenticator for 802.1x, and provide a DHCP address (either native or from an external server).

I attempted to do this once before, but the documentation I used led only to frustration. If anybody knows of clear instructions, please let me know.

Thanks,

Ben Brown

3 Replies 3

This link should help. Expalins the configs and the raidus attributes required at the ACS as well

http://www.cisco.com/en/US/tech/tk389/tk814/technologies_configuration_example09186a00808abf2d.shtml

HTH

Narayan

the 802.1x on the switch is quite simple.

I myself prefer Juniper/Steelbelt radius

over ACS because steelbelt is so much simpler

to configure. I can get the whole thing up and

running in about 10 minutes.

CCIE Security

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco