02-15-2008 10:44 AM - edited 03-11-2019 05:03 AM
Hi,
Im working on a way to monitor our FWSM interfaces and find out that the SNMP is good way for that. Anyway, I've tried also to monitor the FWSM using ping coming from a server on the inside interface to all other interfaces with lower security level and I'm unable to do that.
The only response that i got is from the inside interface.
I already have the command "icmp permit any" in all interfaces. Do you guys know what is missing or wrong, that is causing no response from the other interfaces?
02-15-2008 05:28 PM
Hi Marcos
Issue the following for PINGs
policy-map global_policy
class-map inspection_default
inspect icmp
Issue the following for pinging inside interface from lower sec int
management-access inside
Regards
02-15-2008 06:35 PM
Hello,
I already have this:
class-map inspection_default
match default-inspection-traffic
!
!
policy-map global_policy
class inspection_default
inspect icmp
inspect icmp error
inspect ftp
inspect netbios
inspect rsh
inspect smtp
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect dns maximum-length 1500
!
service-policy global_policy global
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide