Ericsson PBX and E1

Unanswered Question
Feb 15th, 2008
User Badges:

Dear Voice eng(s)


I have one E1 link from telco to my Ericsson MD-110 PBX.

is it possible that I add a cisco VG to send data traffic over this E1?

I have read cisco documents about Er Md110 and cisco Vg but i want user data and voice traffic together on same E1

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
paolo bevilacqua Fri, 02/15/2008 - 12:49
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Yes, connect an ISR router with vwic card 2 ports between telco and pbx, and you will be able to terminate data calls in the router, and send voice calls to the PBX.


Hope this helps, please rate post if it does!

emadehsan Sat, 02/16/2008 - 11:02
User Badges:

accroding the E1 line from telco is no protocol how can configuratio be?


paolo bevilacqua Sat, 02/16/2008 - 11:41
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

No protocol ? what that means? Where are you located ? E1 from telco are all PRI or R2.

Actions

This Discussion