ip nat inside source static: lan user unable to access server

Unanswered Question
Feb 15th, 2008
User Badges:

I am using a cisco 1841 router and after I did an static translation on my router the lan users can no longer access the server. See below:


ip nat inside source static tcp 10.1.4.15 80 12.xxx.xxx.xxx 80 extendable

ip nat inside source static tcp 10.1.4.15 443 12.xxx.xxx.xxx 443 extendable


I am able to ping the WAN and LAN addresses used in the static map but the local users can't access the site. Any suggestions?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
shivlu jain Sun, 02/17/2008 - 04:33
User Badges:
  • Silver, 250 points or more

Your commands are absolutely fine and it should work well. Just want to ask one question had entered the

ip nat inside

ip nat outside


comamnds



regards

shivlu

Mohamed Sobair Sun, 02/17/2008 - 11:37
User Badges:
  • Gold, 750 points or more

Hi,


Local users has nothing to do with your nat mappings.


Thoses mappings are required for external access purposes.


Your Lan users should be able to access the site if they within the Lan subnet. Other than that , check if you have any filtering done could eleminate Lan users from accessig a direct web-server.


HTH

Mohamed

Actions

This Discussion