02-15-2008 02:59 PM - edited 03-10-2019 01:36 PM
We have a Cisco VPN 3005 Concentrator. How do we setup Split Tunnels? Please let me knwo if you need additional information.
Thanks.
02-15-2008 03:15 PM
Hi Diane
access-list Split_T permit ip yourinsidenetworkthatyouwanttosplit itsnetmask vpnpooliprange itsnetmask
access-list Split_T permit ip anotherinsideordmznetworkthatyouwanttosplit itsnetmask vpnpooliprange itsnetmask
group-policy yourpolivyname attributes
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Split_T
Make sure the group policy is set in tunnel-group properties
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml
Regards
02-15-2008 09:32 PM
Thanks for your prompt response. I have VPN 3005 Concentrator, not ASA/PIX firewall. Do you have any documents about Split Tunnels for VPN 3005 Concentrator? Thanks.
02-16-2008 07:30 AM
Here is the guide.
http://www.cisco.com/warp/public/471/vpn-client-3k-split-tunnel.html
02-19-2008 03:14 PM
Huseyin,
Thank you very much for your prompt response and information. This is what I needed. Thanks again.
02-19-2008 04:19 PM
You are welcome :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide