call manager files

Unanswered Question
Feb 16th, 2008
User Badges:

CALL MANAGER EXPRESS

config

-c2801-advipservicesk9-mz.124-15.T.bin

-cme-gui-3.3.x.tar UPLOADED

-NO CME BASIC FILES UPLOADED


-WIth the above in my flash, i was just wondering why iam able to do the call manager express configuration.

-my understanding is that i need a corresponding cme-basic..tar file to upload to the router for call manager express to work.


CORRECT ME IF IAM WRONG. AND WHY I COULD DO CONFIGURATION ON CME?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
pcameron Mon, 02/18/2008 - 04:31
User Badges:
  • Cisco Employee,

The files are only needed on flash if you want to load ringtones, GUI files or phone firmware loads to handsets. The actual configuration of the telephony-service has no dependence on any of these files.





cfajardo1_2 Mon, 02/18/2008 - 22:15
User Badges:

hi,


-does this mean that the heart of the cme is on the ios?

-in other words, cme is buil-in on the ios



thanks

pcameron Mon, 02/18/2008 - 22:50
User Badges:
  • Cisco Employee,

Yes - CME is a software function built into IOS. The supporting files are stored on the flash, but the clever bits are inside IOS.


Actions

This Discussion