Does anyone know how I can find what my current ADSL connection speeds are (using a Cisco 1841)?
A show int, gives the following snippets of output:
ATM0/1/0.1 is up, line protocol is up
Hardware is HWIC-DSLSAR (with Alcatel ADSL Module)
MTU 4470 bytes, BW 736 Kbit, DLY 690 usec,
reliability 255/255, txload 1/255, rxload 29/255
Dialer2 is up, line protocol is up (spoofing)
Hardware is Unknown
Internet address is 188.8.131.52/32
MTU 1500 bytes, BW 56 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 90/255
Obviously the upload will be different to the download speed, so the above information does not reflect that.
I have concerns about the speeds shown. I get around 2.5Mbit download with a cheap router, so if I really am on 768K or 56K, then I'm really not getting good performance! The actual feel of the network is ok, I just want some concrete stats I can monitor.