"ip inspect tcp max-incomplete host" command parameters

Answered Question
Feb 19th, 2008
User Badges:

Hi all,


I have a 7200 router with IOS version 12.3(3)B1 and I am able to configure a limit of 500 for the "ip inspect tcp max-incomplete host" command:


ip inspect tcp max-incomplete host 500 block-time 0


I am migrating to a 7600 with version 12.2(18)SXF but I am not able to configure the limit of 500 as in the 7200. I checked the documentation and the limit is 250, is there a way to increase this value to 500 for the 7600?


Regards.




Correct Answer by ajagadee about 9 years 5 months ago

Unfortunately, there is no way to increase this value to 500. I checked both 12.2(18)SXF and 12.2(33)SRB1 and they both have a limit of 250.


Regards,

Arul


** Please rate all helpful posts **

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
ajagadee Tue, 02/19/2008 - 15:18
User Badges:
  • Cisco Employee,

Unfortunately, there is no way to increase this value to 500. I checked both 12.2(18)SXF and 12.2(33)SRB1 and they both have a limit of 250.


Regards,

Arul


** Please rate all helpful posts **

Actions

This Discussion