Intergrating a fax machine into cisco Callmanager express

Unanswered Question
kplunkett512 Tue, 02/19/2008 - 17:38
User Badges:

What exactly are you looking for here? Are you just trying to route specific DID's (or a single DID) to a specific FXS port?

paolo bevilacqua Wed, 02/20/2008 - 03:11
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

dial-peer voice XXX pots

destination-pattern ZZZ <-- number a received from telco

port x/y/z


Then check you have network-clock commands set also.

kplunkett512 Wed, 02/20/2008 - 04:55
User Badges:

Let's assume you're getting 4 digits from the carrier, and the last four of the DID number is 8878.


*******************


First ensure the voice port is configured:


voice-port 0/1/1

description Fax Machine


Then configure the routing of the DID to your fax port:


dial-peer voice 29 pots

description Fax Machine

destination-pattern 8878

port 0/1/1

forward-digits all


That should do it. Hope this helps!

paolo bevilacqua Wed, 02/20/2008 - 04:59
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi, watch out that if you have "forward-digits all" for a FXS port as in the example above, router will playout these digits after fax answer the calls, that may not be the desired behavior...

Actions

This Discussion