Upgrading from ASA 7.2 -> 8.0. L2L IPSEC Issues...

Unanswered Question
Feb 19th, 2008
User Badges:

Hi All,


We just recently upgrading one ASA firewall to version 8, for evaluation purposes. Upgrade was straight forward with no errors. Most of the existing rules are working fine. We do noticed a problem with most of our L2L IPsecs. We cannot get them working, configuration is there and migrated OK. they are kept stack in MM_WAIT_DELETE and log shows....


%ASA-3-713902: Group = 10.50.133.175, IP = 10.50.133.175, QM FSM error (P2 struct &0xc9080ba0, mess id 0x513c9acd)!


%ASA-3-713902: Group = 10.50.133.175, IP = 10.50.133.175, Removing peer from correlator table failed, no match!


We did try to delete a few and recreate them, but no luck....


Any ideas????

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
pavlosd Tue, 02/26/2008 - 06:49
User Badges:

Hi All,


Just to let you know that, we managed to solve our problem by upgrading to interim release 8.0(3)-6.



Regards.


Actions

This Discussion