cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
394
Views
0
Helpful
3
Replies

WLC526 and 1230AP

ndiab
Level 1
Level 1

Can we connect a 1230 AP to the WLC526 provided we convert the AP to LW

3 Replies 3

Rob Huffman
Hall of Fame
Hall of Fame

Hi Naser,

Sadly, the WLC 526 only supports the LAP 521. No other AP Models can be used in this solution.

Q. Which access point products are included in the Cisco Mobility Express Solution?

A. Two Cisco 500 Series Wireless Express Access Point products are in the Cisco Mobility Express Solution; their part numbers follow:

• AIR-AP521G-x-K9 (standalone access point)

• AIR-LAP521G-x-K9 (controller-based access point)

The hardware for these products is the same. The products have different software, but the access points can be converted from standalone mode to the controller-based mode with a simple software upgrade.

http://www.cisco.com/en/US/prod/collateral/wireless/ps7306/ps7319/ps7338/prod_qas0900aecd8060c860_ps7320_Products_Q_and_A_Item.html

As a core element of the Cisco Mobility Express Solution, the mobility controller is built to specifically support the Cisco 500 Series Wireless Express Access Points.

http://www.cisco.com/en/US/products/ps7320/index.html

Hope this helps!

Rob

ndiab
Level 1
Level 1

Ok, What if I've the AIR-WLC2006-K9 controller, Can the LAP521 be managed through this controller

Review Cisco Networking products for a $25 gift card