incoming call config on VIC2-2BRI-NT/TE

Unanswered Question
Feb 20th, 2008

ive installed VIC2-2BRI-NT/TE module on my voice gateway where my cme/cue resides.


OBJECTIVE;

-Incoming call will connect directly to an extension 100 but after 5 rings is finished, then it shoud procced to the cue auto attendant 101.


Anyone help me for the configuration please



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Paolo Bevilacqua Wed, 02/20/2008 - 09:39

voice-port x/y/z

connection plar 100


ephone-dn 100 dual-line

number 100

call-forward noan 101 timeout 30


You can simplify configuration by placing common call forward settings under an ephone-dn-template, and apply the latter to all or groups of ephone-dn's.


Hope this helps, please rate post if it does

Actions

This Discussion