Can't get traffic through RA-VPN

Unanswered Question
Feb 20th, 2008
User Badges:

ASA 5510, 7.2.3.

VPN-conf done via wizard. AAA ok and everything looks fine, tunnel is up but can't get any traffic through. Saw some "no translation group for" in the ASDM-log wich seems to be related... Saw some other threads about this issue but can't pin point the problem in my setup.

Please help, see attached config.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
ajagadee Wed, 02/20/2008 - 12:31
User Badges:
  • Cisco Employee,

I see a "vlan1_nat0_outbound" ACL Configured on the ASA but not applied anywhere. You need to apply it, something like.

nat (native-vlan) 0 vlan1_nat0_outbound



** Please rate helpful posts **


This Discussion