Can't get traffic through RA-VPN

frecarlen · ‎02-20-2008

ASA 5510, 7.2.3.

VPN-conf done via wizard. AAA ok and everything looks fine, tunnel is up but can't get any traffic through. Saw some "no translation group for 192.168.1.90" in the ASDM-log wich seems to be related... Saw some other threads about this issue but can't pin point the problem in my setup.

Please help, see attached config.

ajagadee · ‎02-20-2008

I see a "vlan1_nat0_outbound" ACL Configured on the ASA but not applied anywhere. You need to apply it, something like.

nat (native-vlan) 0 vlan1_nat0_outbound

Regards,

Arul

** Please rate helpful posts **