7940 Phone with Logo/Watermark

pritchda78 · ‎02-20-2008

I am trying to figure out how to setup a watermark or logo-background on a 7940. I have configured the Idle image, but I need to see the line extensions this covers up. I am currently using CCM4.1, but upgrading to 4.3 shortly.

Rajesh Revuru · ‎02-20-2008

Please look at the really good thread from Rob.

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddf12e0/0#selected_message

Jaime Valencia · ‎02-20-2008

that thread is only for 7970s, the procedure does not apply to 7940s due to the resolution and screen size not being the same

think you already have this:

Creating Idle URL Using Graphics on Cisco IP Phone

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_tech_note09186a00801c0764.shtml

you can check this page:

http://www.ccmstuff.net/

there are some services that show images and might be what you're looking for

HTH

HTH

java

if this helps, please rate

pritchda78 · ‎02-21-2008

This answeres my question, we can't have a true wallpaper/watermark on a 7940. I'll just stick with the Idle pic and hope for an upgrade or my company to buy a thousand 7970s!

Thanks for the help.

Jaime Valencia · ‎02-21-2008

actually you can have a wallpaper in 7941's and 7961's also

of course it's not as fancy as a nice colored big screen as with the 797Xs but you can also configure a background for those models

less resolution and only grey-scale but it's an option

HTH

HTH

java

if this helps, please rate