Upgrade to WLC & WCS 5.x

Unanswered Question
Feb 20th, 2008
User Badges:
  • Cisco Employee,

I've recently upgraded from 4.2 to 5.0, and started getting these alarms

AP's Interface:0(802.11b) Operation State Up: Base Radio MAC:00:1d:46:fd:f4:b0 Cause=Admin Configured

I've seen some issues with some clients deauthenticating, does this means the radio is actually going down or is just a bug? The alarms is showing up all day longs.

Appreciate your help.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
dennischolmes Thu, 02/21/2008 - 06:34
User Badges:
  • Gold, 750 points or more

I am not sure. I will look into it. It appears you have become the first christian thrown to the lions and they are hungry. I wouldn't be so alarmed by a state up alarm as you would be if you see a state down alarm. Are you seeing any of those? Also, any disassociation from the controller?

mauramir Thu, 02/21/2008 - 06:55
User Badges:
  • Cisco Employee,

I'm seeing down alarms also, I thought I posted that. There has not been disassociations, what I've seen is that it's happening more frequently on some APs.

and also on 4.2 I'm seeing these messages.


dennischolmes Thu, 02/21/2008 - 07:19
User Badges:
  • Gold, 750 points or more

Bear in mind there are still alot of open caveats on both 4.2 and 5x. If you are not seeing disassociations and are seeing no major client outages I wouldn't worry too much. If on the other hand the client drops are becoming unbearable I would contact TAC.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode