WS-X6724-SFP and prioritization

Answered Question
Feb 20th, 2008
User Badges:

Hi All,

We have a 6513 with dual MSFC/Sup720 (12.2(17r)S2) and have ordered a WS-X6724-SFP blade (w DFC3B daughter card). The node runs CatOS.


Were hoping to run voice across one of the links into this card and have run into a possible issue - can anyone confirm if this blade supports ingress prioritization? Unable to find any info on Cisco. Marking/classification isnt an issue.


Many thanks.

Correct Answer by Edison Ortiz about 9 years 4 months ago

No, the WS-X6724-SFP blade does not have an ingress priority queue. It does have an egress priority queue.


Here is the QoS structure on that linecard.


Tx-1p3q8T

Rx-1q8T (2q8T when using dCEF)


More information at:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet0900aecd801459a7.html


HTH,


__


Edison.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Edison Ortiz Thu, 02/21/2008 - 07:23
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

No, the WS-X6724-SFP blade does not have an ingress priority queue. It does have an egress priority queue.


Here is the QoS structure on that linecard.


Tx-1p3q8T

Rx-1q8T (2q8T when using dCEF)


More information at:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet0900aecd801459a7.html


HTH,


__


Edison.

danpwalker Thu, 02/21/2008 - 17:09
User Badges:

Edison,

Many thanks for your help. Much appreciated.


Actions

This Discussion