Solved: WS-X6724-SFP and prioritization

danpwalker · ‎02-20-2008

Hi All,

We have a 6513 with dual MSFC/Sup720 (12.2(17r)S2) and have ordered a WS-X6724-SFP blade (w DFC3B daughter card). The node runs CatOS.

Were hoping to run voice across one of the links into this card and have run into a possible issue - can anyone confirm if this blade supports ingress prioritization? Unable to find any info on Cisco. Marking/classification isnt an issue.

Many thanks.

Edison Ortiz · ‎02-21-2008

No, the WS-X6724-SFP blade does not have an ingress priority queue. It does have an egress priority queue.

Here is the QoS structure on that linecard.

Tx-1p3q8T

Rx-1q8T (2q8T when using dCEF)

More information at:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet0900aecd801459a7.html

HTH,

__

Edison.

View solution in original post

Edison Ortiz · ‎02-21-2008