m.hierling Sat, 03/15/2008 - 04:40
User Badges:

Hi,


Yes it is. You need to configure Ethernet and Radiointerfaces with bridge-group and a SSID for that vlan.


dot11 vlan-name hfm vlan 207

dot11 ssid VLAN207

vlan 207

authentication open

authentication key-management wpa

wpa-psk ascii password


interface Dot11Radio0

encryption vlan 207 mode ciphers aes-ccm tkip

ssid VLAN207


interface Dot11Radio0.207

encapsulation dot1Q 207

no ip route-cache

bridge-group 207


interface FastEthernet0.207

encapsulation dot1Q 207

no ip route-cache

bridge-group 207


thats it, basically. be aware that bvi1 (management) has to be in native vlan, asume vlan 42 is your management:

interface Dot11Radio0.42

encapsulation dot1Q 42 native


regards Martin



Actions

This Discussion