02-21-2008 07:30 AM - edited 07-03-2021 03:26 PM
Hi! we have 3 wifi spots installed with the following configuration:
AIR-AP1210 IOS AP, Cbus&MPCI slots EnetUplink
AIR-PWR-SPLY-CE AIR line cord central EU/Universal
S12W7K9-12302JA Cisco 1200 series IOS wireless LAN
AIR-ANT4941 2 x 2.4 GHZ, 2.2dBi dipole ant + RP-TNC connect
AIR-MP21G-E-K9 802.11g configurable radio module for AP
We want to add three more spots with exactly the same configuration to preserve homogeneity, however I have noticed that there is a AIR-MP21G-E-K9= module that supposedly upgrades AIR-MP21G-E-K9.
What is the difference and benefits of the upgrade? Should I buy SIX of those modules in order to upgrade the whole infrastructure?
Best regards.
02-22-2008 05:26 AM
Hi Javier,
From what you have listed for the 3 existing 1210 AP's, they already have this upgrade kit installed :) So you could just go ahead and order the equivalent parts for the 3 new locations.
Hope this helps!
Rob
02-22-2008 05:27 AM
Hi Javier,
From what you have listed for the 3 existing 1210 AP's, they already have this upgrade kit installed :) So you could just go ahead and order the equivalent parts for the 3 new locations.
Hope this helps!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide