Upgrade of AP1210 system

ipts_helpdesk · ‎02-21-2008

Hi! we have 3 wifi spots installed with the following configuration:

AIR-AP1210 IOS AP, Cbus&MPCI slots EnetUplink

AIR-PWR-SPLY-CE AIR line cord central EU/Universal

S12W7K9-12302JA Cisco 1200 series IOS wireless LAN

AIR-ANT4941 2 x 2.4 GHZ, 2.2dBi dipole ant + RP-TNC connect

AIR-MP21G-E-K9 802.11g configurable radio module for AP

We want to add three more spots with exactly the same configuration to preserve homogeneity, however I have noticed that there is a AIR-MP21G-E-K9= module that supposedly upgrades AIR-MP21G-E-K9.

What is the difference and benefits of the upgrade? Should I buy SIX of those modules in order to upgrade the whole infrastructure?

Best regards.

Rob Huffman · ‎02-22-2008

Hi Javier,

From what you have listed for the 3 existing 1210 AP's, they already have this upgrade kit installed :) So you could just go ahead and order the equivalent parts for the 3 new locations.

Hope this helps!

Rob

Rob Huffman · ‎02-22-2008

Hi Javier,

From what you have listed for the 3 existing 1210 AP's, they already have this upgrade kit installed :) So you could just go ahead and order the equivalent parts for the 3 new locations.

http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps430/product_data_sheet0900aecd801b9233_ps4570_Products_Data_Sheet.html

Hope this helps!

Rob