02-21-2008 06:42 PM - edited 03-15-2019 09:00 AM
Hi all,
I have this issue with the cisco 7911 ip phones, not been able to register with CCME.
Cisco 7960G can register with out any issues.
The Problem seems to appear when i add configuration on the switch for the interfaces.
when i assign the switch Ports with one Vlan 7911 registers.
when i put both acces/Voice vlans on the interface the phone just cuts itself from the network.
here is a config of one swith port.
interface FastEthernet2/0/13
description === Production Network ===
switchport access vlan 10
switchport voice vlan 1
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
mls qos trust device cisco-phone
mls qos trust cos
spanning-tree portfast
spanning-tree bpduguard enable
================
Thanks
05-01-2008 02:37 PM
Hi, i'have the same problem with a 3560 switch. Anyone has found the solution?
05-01-2008 05:12 PM
spiecomcisco Yes i Managed to solve the issue
Don't Use VLAN 1 for VOIP, It just doesn't work with these switches and Phones.
Mine was solved when i moved the voice vlan from Vlan 1 to vlan 10.
Please rate if it helps
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: