Need OID to poll the state of the ACE blade (backup or primary)

Unanswered Question
Feb 22nd, 2008
User Badges:

Hi people,


I need to poll an OID giving me the status of the balde : backup or primary.


I think this information is given in the


SLB-EXT - Fault Tolerance Table *


but this table is empty....


I would like you to help me retrieving in SNMP the state of my ACE blade.


I can't make the difference between backup and active state (follow an SNMP walk).

FOR PLM

1.3.6.1.4.1.9.9.117.1.2.1.1.1.1 = 1

1.3.6.1.4.1.9.9.117.1.2.1.1.2.1 = 2

1.3.6.1.4.1.9.9.117.1.2.1.1.3.1 = 1

1.3.6.1.4.1.9.9.117.1.2.1.1.4.1 = 0.00 seconds

1.3.6.1.4.1.9.9.117.1.2.1.1.6.1 = Reset

1.3.6.1.4.1.9.9.117.1.2.1.1.7.1 = Operational State OK

1.3.6.1.4.1.9.9.117.1.2.1.1.8.1 = 625474

FOR WIN

1.3.6.1.4.1.9.9.117.1.2.1.1.1.1 = 1

1.3.6.1.4.1.9.9.117.1.2.1.1.2.1 = 2

1.3.6.1.4.1.9.9.117.1.2.1.1.3.1 = 1

1.3.6.1.4.1.9.9.117.1.2.1.1.4.1 = 0.00 seconds

1.3.6.1.4.1.9.9.117.1.2.1.1.6.1 = Reset

1.3.6.1.4.1.9.9.117.1.2.1.1.7.1 = Operational State OK

1.3.6.1.4.1.9.9.117.1.2.1.1.8.1 = 803130


Anyone who can help me?


Thanks


Kurt

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion