02-24-2008 07:54 AM - edited 03-11-2019 05:07 AM
Hi,
I'm new to Cisco IOS and routers and have a basic 2600 router config that I am using on my home cablemodem connection and I was hoping I could get some recommendations or suggestions on anything more I should do to protect my network. I setup an Exchange server for SMTP email, I want to be able to hit the same server with remote desktop and www. Any help would be greatly appreciated. Thanks.
I've attached my config.
02-24-2008 09:06 AM
Here is a suggestion. Use CBAC:
ip inspect name CBAC tcp alert on audit-trail on
ip inspect name CBAC udp alert on audit-trail on
ip inspect name CBAC icmp alert on audit-trail on
ip inspect name CBAC http alert on audit-trail on
ip inspect name CBAC smtp alert on audit-trail on
interface F0/0
ip inspect CBAC out
02-27-2008 07:00 AM
Thanks for the reply.
I'm not familiar with 'ip inspect'. Would I use that instead of access lists? Do you know of a good link where I can read/learn about using ip inspect? Thanks again.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: