Cisco 837 takes me to inital setup config every power down or reload.

Unanswered Question
Feb 24th, 2008

Hi I am able to configure this cisco 837 and can copy run start (WR) but if I rebboot or reload the booting process stops at "inital setup config :yes:no:"

The flash was not erased but i did do wipe out the config. it took me to the rommon. The box is working as I using it to surf the net.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion