We are having ASA 5500 series and on whcih we have configured remote vpn access. This ASA then connected to L3 swicth and also to our router.
There are different subnet (vlans ) on L3 swicth. Similarly different subnets are reachable from router( connected by leased serial lines to other locations ). A simple static routing is done to connect our other locations. We have configured a pool of IP address on ASA which is used to give IP address to VPN users one by one. Problem which we are facing is that once user is connected to ASA using VPN client loaded on his notebook, user can access all subnets connectd to L3 switch. But subnets reachable by router ( other locatios ) are not reachable from users notebook.
The subnet of the pool which we are using in ASA for remote access VPN client is directed to PIX inside IP address from router and from L3 swicth.
That means if packet with Target address of the ASA remote access POOL is directed to pix inside interface as next hop. We have checked it using tracert.
Thanks in advance
Any experience pls share.