Binding the internet connection

Unanswered Question
Feb 25th, 2008
User Badges:

Hi


I have 3200 series router with two interenet connections (ISP-1 and ISP-2). is there any config to have load sharing on this two connections? Currently ISP-2 is a backup link . Pls advise.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
guruprasadr Mon, 02/25/2008 - 02:07
User Badges:
  • Gold, 750 points or more

HI, [Pls Rate if HELPS]


Detailed description on your requirment:


Per Packet Load Balancing:


>> Will not work


Per destination based Load Balancing:


>> May work, if you are accessing some specific application like ftp, vpn access over Internet to some destinations.


Multilink Option:


Since the Link are purchased from two different ISP, will not be possible.


Available Option:


If you have owned an AS, with multiple LAN Segments means:


>> Each Segment can be destined to different ISP's using "per destination load balancing Concept"


Enable per-destination load Balancing:

=======================================

Router(config)# hw-module slotnumber ip load-sharing per-destination

>> Disables per-packet and re-enables per-destination load balancing.


PLS RATE if HELPS


Best Regards,


Guru Prasad R

Actions

This Discussion