02-25-2008 05:05 AM - edited 03-17-2019 09:16 PM
How I can configure the SCCP protocol and add the Cisco Call Manager (TFTP Server) to MCU 3510?
02-25-2008 10:07 PM
See if this helps:
Regards,
/mao
02-26-2008 06:34 AM
Mowuor, the configuration of the MCU 3510 is very different, to configure the MCU 3510 is necessary install the Cisco IPVC Tools and run Cisco IPVC Configuration Utility, and in this aplication, i don't see the options to configure the IP address of the TFTP (cisco call manager) and the option to configure the SCCP protocol.
Without this parameter o configuration, How can the Call Manager register the MCU? If both, Cisco Call Manager and the MCU, needs this information ?. In the cisco call manager I add the MAC address of the MCU in the conference type 35XX, and this conference bridge no appear registered ?
Or the MCU 3510 use other protocols to register to Cisco Call Manager?
???
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide