Transcoder on CCM 6.0

charl · ‎02-25-2008

HI,

Got a 3845 running c3845-ipvoicek9-mz.124-18.bin and I am trying t oconfigure hardware transcoder resources on it. Along with this we are using CCM 6.0....which brings the problem.

the "sccp ccm <ip addie> identifier 1 version 5.01" command does not allow me to use version 5.01 or newer. Anyone else come accross this?

Thnx

Charl

Rob Huffman · ‎02-25-2008

Hi Charl,

Have a look at the good answer from Alfred in this recent post;

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddf63ba

Hope this helps!

Rob

charl · ‎02-25-2008

Hi, Thanks for that. It seems that when we used IOS 12.4.15T3 it resolved the issue by allowing us to state the version to 5.01 (even thou we are running 6.0)

Leaving the version out seems to default to 3.x