CME Phone TFTP File Not Found

Answered Question

I am working on a CME lab. I am new to Cisco Voip and am having a few issues. My lab phone is saying TFTP file not found. I have network connectivity through it and can ping my router. I have verified that the file was placed into flash after untaring it. Am I missing a part of the config?

Thanks

Eric

Attachment: 
I have this problem too.
0 votes
Correct Answer by Majdi Harb about 8 years 9 months ago

Hi Eric,

did u copy or axtract firmware files to flash:/phone/7940-7960 directory?

any way, try this:

tftp-server flash:P0030702T023.bin

tftp-server flash:P0030702T023.loads

tftp-server flash:P0030702T023.sb2

tftp-server flash:P0030702T023.sbn

hth

/majdi

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Majdi Harb Mon, 02/25/2008 - 09:48

Hi Eric,

did u copy or axtract firmware files to flash:/phone/7940-7960 directory?

any way, try this:

tftp-server flash:P0030702T023.bin

tftp-server flash:P0030702T023.loads

tftp-server flash:P0030702T023.sb2

tftp-server flash:P0030702T023.sbn

hth

/majdi

I have them in the 7940-7960 directory still, I do not have them in the general partition of the flash. Should they be, or will they be found if I specifically specify that they are in the 7940-7960 folder?

I found that problem to be the phone. I reset it to factory default and it will not talk to the system. I grabbed one that was pre-configured and changed it to DHCP and it sync'd up with the system within a couple of minutes.

Thanks

Eric

Actions

This Discussion