About Ciscoview Mini-RMON issue

Answered Question
Feb 25th, 2008
User Badges:

Dear All,

Two question please help


1.router such as 831,871,2801 etc.whether support Mini-RMON(router self have this function )

2.ciscoview mini-rmon whether support device 831,871.

Thanks

Correct Answer by Joe Clarke about 9 years 3 months ago

You can manually config RMON events and alarms on the routers to watch the dot3StatsFCSErrors and dot3StatsSingleCollisionFrames for the interface in which you're interested. See http://www.cisco.com/en/US/tech/tk961/technologies_configuration_example09186a0080094478.shtml for more on setting up RMON events and alarms from the CLI.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Joe Clarke Mon, 02/25/2008 - 18:35
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

The 2801 is supported provided it has an ethernet switching module installed. the 831 and 871 are not supported, and do not have mini-RMON capabilities.

cn1by080byj Mon, 02/25/2008 - 19:08
User Badges:

Thanks!

Would you please tell me any other way so that i can setup collision or CRC detection function and can receive alert about this?

Correct Answer
Joe Clarke Mon, 02/25/2008 - 19:16
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

You can manually config RMON events and alarms on the routers to watch the dot3StatsFCSErrors and dot3StatsSingleCollisionFrames for the interface in which you're interested. See http://www.cisco.com/en/US/tech/tk961/technologies_configuration_example09186a0080094478.shtml for more on setting up RMON events and alarms from the CLI.

Actions

This Discussion