cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
869
Views
0
Helpful
3
Replies

About Ciscoview Mini-RMON issue

cn1by080byj
Level 1
Level 1

Dear All,

Two question please help

1.router such as 831,871,2801 etc.whether support Mini-RMON(router self have this function )

2.ciscoview mini-rmon whether support device 831,871.

Thanks

1 Accepted Solution

Accepted Solutions

You can manually config RMON events and alarms on the routers to watch the dot3StatsFCSErrors and dot3StatsSingleCollisionFrames for the interface in which you're interested. See http://www.cisco.com/en/US/tech/tk961/technologies_configuration_example09186a0080094478.shtml for more on setting up RMON events and alarms from the CLI.

View solution in original post

3 Replies 3

Joe Clarke
Cisco Employee
Cisco Employee

The 2801 is supported provided it has an ethernet switching module installed. the 831 and 871 are not supported, and do not have mini-RMON capabilities.

Thanks!

Would you please tell me any other way so that i can setup collision or CRC detection function and can receive alert about this?

You can manually config RMON events and alarms on the routers to watch the dot3StatsFCSErrors and dot3StatsSingleCollisionFrames for the interface in which you're interested. See http://www.cisco.com/en/US/tech/tk961/technologies_configuration_example09186a0080094478.shtml for more on setting up RMON events and alarms from the CLI.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: