7206 VXR NPE-G2 Boot problem

Unanswered Question
Feb 26th, 2008
User Badges:

Hi, I have replaced router's processing engine NPE-400 with NPE-G2 processing engine .

The router has c7200p-advipservicesk9-mz.124-15.T3.bin IOS on disk2.

I made a basic configuration. I wrote only hostname on the router and saved this configuration.

When I rebooted the router I get "Would you like to enter the initial configuration dialog?(Yes/no)" message.

The router didn't boot with this configuration. I have checked config-register value. it was 0x2102.

How can I solve this problem?

Thanks in advance.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
aijaz802 Tue, 02/26/2008 - 05:44
User Badges:
  • Bronze, 100 points or more


I'm not sure but check...

#dir nvram: you should have startup-config file along with other files.

try to save one more time.... or do

#copy running-config nvram:startup-config

I hope this helps....If so pls rate it..



obasli Wed, 02/27/2008 - 08:38
User Badges:


I have already tried these options but it didn't solve my problem.

Thanks for your help.


This Discussion