H-REAP Question

Unanswered Question
Feb 26th, 2008
User Badges:

I have a question about H-REAP. I'm using a 4402 with 10 1231 APs and two SSIDs (guest and staff). I'm expanding wireless to some of my other sites and want to use H-REAP with local switching. The APs going into the remote sites are 1241s so they do support H-REAP.


If I tell configure my staff SSID for H-REAP local switching, will the 10 older 1231 still central switch the SSID since they do not support H-REAP? Or will they just fail to work with that SSID?


Thanks,


Patrick




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Scott Fella Tue, 02/26/2008 - 21:07
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

The 1240's support H-REAP with the 4.0 code on the WLC. Setting the WLAN to h-reap local switching allows you to use the ssid in either h-reap or local mode.


Hope this helps.


http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008081103d.shtml

hypnotoad Wed, 02/27/2008 - 11:00
User Badges:

Thanks for the information. I did a test last night and was able to have the same SSID work with H-REAP and central switching.


--Patrick


Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode