02-26-2008 05:44 PM - edited 03-15-2019 09:05 AM
Hello,
I need the part number of 8-port BRI network module that can be used for voice. The NM will be connected to a 2851 router.
Thank you,
Ricky
02-26-2008 11:02 PM
Hi Ricky,
unfortunately there are only 8-port data BRI network modules available.
i think you have to insert 4x VIC-2BRI-NT/TE to reach your 8-port voice BRI in the 2800 series.
http://www.cisco.com/warp/public/788/products/2isdn_bri_vic.html
we had the same problem in several remote offices...
cheers, oliver
02-26-2008 11:06 PM
Thank you very much.
02-27-2008 02:07 AM
Hi,
the other alternative is that you use 1 x EVM-HD-8FXS/DID with 2 x EM-4BRI-NT/TE.
This will give you in additional 8 FXS port that you may or not want, but it is all contained into a single NM slot:
Hope this helps, please rate post if it does!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: