Upgrading Exchange on Unity

Answered Question
Feb 27th, 2008

We are running Exchange 5.5 on Unity 4.0(3). Is it possible to upgrade to Exchange 2000 / Exchange 2003 without affecting anything on Unity?

Note - Exchange 5.5 is on the same box as Unity 4.0(30, but the Unity server is a member of our company domain. i.e. AD is integrated.

Correct Answer by Brandon Buffin about 8 years 12 months ago

Take a look at the following link.


http://www.cisco.com/en/US/docs/voice_ip_comm/unity/white/paper/mig/MigVM_UM.html


It referecnces Unity 3.1, but the concepts apply to later versions as well.


Hope this helps.


Brandon

Correct Answer by Brandon Buffin about 9 years 13 hours ago

Are you running unified messaging or voicemail only? If unified messaging, Exchange must be on a seperate server. If voicemail only, you can upgrade to Exchange 2000/2003. However, Exchange 2003 requires Unity 4.0(5). It might be a good time to think about upgrading Unity as well. See the Reconfiguration and Upgrade guide below for Exchange upgrade steps.


http://www.cisco.com/en/US/docs/voice_ip_comm/unity/42/upgrade/guide/ex/ru_110.html#wp1260638


Hope this helps. If so, please rate the post.


Brandon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Brandon Buffin Wed, 02/27/2008 - 06:01

Are you running unified messaging or voicemail only? If unified messaging, Exchange must be on a seperate server. If voicemail only, you can upgrade to Exchange 2000/2003. However, Exchange 2003 requires Unity 4.0(5). It might be a good time to think about upgrading Unity as well. See the Reconfiguration and Upgrade guide below for Exchange upgrade steps.


http://www.cisco.com/en/US/docs/voice_ip_comm/unity/42/upgrade/guide/ex/ru_110.html#wp1260638


Hope this helps. If so, please rate the post.


Brandon

UCBNOCWAN Wed, 02/27/2008 - 22:36

Hi Brandon,

Thanks a ton for this excellent doc. Really helps a lot!

We are running Unity only, but have plans to upgrade to Unified Messaging in the near future. Is there any doc that lists all the steps necessary to move from a "Voice Mail only" configuration to Unified Messaging"? Thanks a lot.


Regards,

Abhijit Das.

UCBNOCWAN Thu, 02/28/2008 - 05:44

Thanks a lot Brandon for your kind assistance. really appreciate it!

Have a nice day.


Regards,

Abhijit.

Actions

This Discussion