FWSM and VRF

bimckenz · ‎02-27-2008

We are setting up vrf's for different departmental domains and they will all come together in an FWSM module to govern access between the vrfs. Does anyone have any documentation on how to set up the FWSM for this? I need to come up to speed quickly on how to configure.

Thanks

whisperwind · ‎02-27-2008

I did this on an ASA, but the ASA is not VRF aware so what I did was use VLANs and on the router I converted VRFs to VLANs.

No idea if the FWSM can support VRFs but I suspect not although YMMV....

cdusio · ‎02-28-2008

VRF's are configured on the switch itself not on the FWSM. VRF's are used in conjunction with the FWSM to acheive path isolation.