Unable to sync configuration from Active

Unanswered Question
Feb 28th, 2008
User Badges:

Dear All,

My secondary PIX started to reboot automatically and it is giving below messages.

My pix is 515E with 8.0 OS

Can some body tell what can be the problem



========================= NOTICE =========================

This platform is licensed to run in

failover secondary mode only

==========================================================



Detected an Active mate


Unable to sync configuration from Active

.


========================= NOTICE =========================

This platform is licensed to run in

failover secondary mode only

==========================================================



Detected an Active mate


Unable to sync configuration from Active

.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
amritpatek Fri, 03/07/2008 - 07:25
User Badges:
  • Silver, 250 points or more

Check if the failover cable is connected properly and not damaged. If this does not helps configure failover on some other interface of the device.

Actions

This Discussion