DHCP Problem in PIX

Unanswered Question
Feb 28th, 2008
User Badges:
  • Bronze, 100 points or more

Hi,

I am trying the dhcprelay configuration on PIX where the scenario is..


There are four logical interafaces configured on the inside interface of the PIX.

Each subinterface is in different network where the DHCP server is connected to inside interface.

I'm trying to do a dhcp relay configuration on all the subinterface to direct the request to inside interface.


The config is..

dhcprelay server x.x.x.x inside

dhcprelay enable VLAN2

dhcprelay enable VLAN3

dhcprelay enable VLAN4

dhcprelay enable VLAN5


The request is hitting the PIX but pix is unable to relay it to the server...



PIX hardware is PIX 515 64 MB RAM, CPU Pentium 200 MHz

version is 6.3(3) with Unrestricted License.




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ebreniz Wed, 03/05/2008 - 12:36
User Badges:
  • Silver, 250 points or more

Please send output of the following commands:

debug dhcprelay event


debug dhcprelay packet


debug dhcprelay error


show dhcprelay statistics


show dhcprelay


http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00801055dd.shtml

http://www.cisco.com/en/US/customer/products/hw/vpndevc/ps2030/products_tech_note09186a0080094aad.shtml


Actions

This Discussion