MGCP configuration download not working

Unanswered Question
Feb 28th, 2008
User Badges:


I have a problem with ccm-manager config command where it says that configuration is successfully downloaded, but configuration attempted stays to 0. As a result I have to manually insert the mgcp commands (e.g mgcp-call agent and redundant host). This output is along with the manual config. If I dont do manual config, there will be no call-agents listed although auto config download was successul.

Any input will be much appreciated.



GW01-2811#show ccm

MGCP Domain Name: GW01-2811

Priority Status Host


Primary Registered

First Backup Backup Ready

Second Backup None

Current active Call Manager:

Backhaul/Redundant link port: 2428

Failover Interval: 30 seconds

Keepalive Interval: 15 seconds

Last keepalive sent: 14:15:06 EST Feb 28 2008 (elapsed time: 00:00:07)

Last MGCP traffic time: 14:15:06 EST Feb 28 2008 (elapsed time: 00:00:07)

Last failover time: 10:08:38 EST Feb 26 2008 from (

Last switchback time: 10:09:08 EST Feb 26 2008 from (

Switchback mode: Graceful

MGCP Fallback mode: Enabled/OFF

Last MGCP Fallback start time: 10:09:11 EST Feb 26 2008

Last MGCP Fallback end time: 10:10:46 EST Feb 26 2008

MGCP Download Tones: Disabled

Configuration Auto-Download Information


No configurations downloaded

Current state: Downloading XML file

Configuration Download statistics:

Download Attempted : 5

Download Successful : 5

Download Failed : 0

Configuration Attempted : 0

Configuration Successful : 0

Configuration Failed(Parsing): 0

Configuration Failed(config) : 0

Last config download command:

FAX mode: cisco

Configuration Error History:

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Brandon Buffin Thu, 02/28/2008 - 13:43
User Badges:
  • Purple, 4500 points or more

Do you have both of the following commands?

ccm-manager config server

ccm-manager config


toormehdi Thu, 02/28/2008 - 13:45
User Badges:

Yes both of these commands are in there.

Also I have tried inserting them over and over again.

The download attempt keeps on increasing

but configuration attempt stays at ZERO (0)

Thanks for your help

Please let me know if you have clue.



This Discussion