IOS related

Pushpendra Tiwari · ‎02-28-2008

Hiii

I have a cisco 2960 switch.and i would not upload IOS for the cisco 2960 switch.When i am given IP in switch and local PC via conected for TFTP.

And When i m given these command it shuld give me error.

My cisco Switch IOS :-

Flash:C2960-Lanbase-MZ.122-35.SE5/C2960-Lanbase-MZ.122-35.SE5.bin

command:-

1-Copy flash TFTP

2-Source file :- for the switch

3:-IP address:-for PC

4:-Destination file:- for locate folder

5:-TFTP on

Error for that it should not connect

Please Help me immediate?:------

Regards

Pushpendra Kumar Tiwari

Network Engineer

guruprasadr · ‎02-28-2008

HI Pushpendra, [PLs rate if helps]

Can you please POST the Error you are getting during IOS Upgrade.

>> Ping from Switch to PC and viceversa = it should be OK and provide Ping Response only then you can do successful IOS Upgrade.

>> Make sure the TFTP is correctly mapped to the Folder where the correct IOS is stored.

>> Make sure your Windows XP / 2000 PC firewall is turned OFF.

Pls Rate if HELPS

Best Regards,

Guru Prasad R